.FILE=SMSLOGO.QFX

                QuickLink II Fax  S/R
                 Documentation Update

<<< Supplemental files >>>
    If your diskette is a 5¬" 1.2mb diskette, there are additional files
    which you may want to download from American E-mail BBS (714-362-5822).
    The following files are not critical for QuickLink II Fax to run.

    FONTINTL.BIN    International character set font for use on fax
                cover pages and headers.

    38CL8F86.SFT    PCL font for Landscape Courier Bold typeface.
    380L8F86.SFT    PCL font for Landscape Courier Roman-8 symbol set.
    4G1LG545.SFT    PCL font for Portrait Helvetica Italic 10 Point.

<<< SNDFAX Command Line Notes >>>

    From the DOS command line, you have the capability to send faxes in the
    background.  The command line is as follows:

    SNDFAX /F:<FileName> /FN:<FaxNumber> /GP:<Group>
    
    Additional command line options not listed in the manual:

    /AT: or /ATTN:  - Specify the ATTN: field on the cover page
    /DT: or /DATE:  - Date at which the fax is to be sent  MM-DD-YY
    /FN: or /FAX#:  - Fax phone number where fax is to be sent
              Note: Replace all commas in the phone number
              with the '.' character
    /TO:            - Specify the TO: field on the cover page

    The documents that you send using the DOS command line must be in a QFX
    or REC file  format.  If no schedule time is  specified  on the command
    line, the fax will be sent immediately.


<<< QuickLink II Fax DOS Variable >>>

    QuickLink II Fax no longer needs a DOS environment  variable to be run
    from  a different subdirectory.  Be sure to  include the QL II Fax sub-
    directory in your PATH variable so DOS can find the QL2FAX program.

    Example:

    SET PATH=C:\QL2FAX

    If you already have a PATH variable, you can either add ";C:\QL2FAX" to
    the already existing PATH statement, or add a new  line after the first
    SET PATH statement which contains "SET PATH=C:\QL2FAX;%PATH%".


<<< About This File >>>

    The first line in this  file will cause the  converted file SMSLOGO.QFX
    (a graphic image) to  be merged  with  the contents of this text.  When
    you convert (check the Center text box on the Fax Setup window for best
    results) this document (QLREADME.TXT)  and fax it out or  view  it with
    the View  Fax  Document option,  you can see the  results.  This is the
    same method you would use if you wanted  to include a company header or
    a signature graphic on your faxed text documents.ÿÿ


<<< Additional FastFax Command Line Options >>>

FASTFAX [options]

/E  - When converting a PCL document, do not use EMS or XMS memory page
      swapping.  The conversion process will use the default drive (where
      FastFax was run from) as a disk swapping area.

/M# - Specify the amount of RAM to reserve for FastFax when it is activated.
      This switch may be useful if you have problems accessing a large fax
      phone list.  The # represents the number of 1024 (1K) bytes to reserve
      for FastFax.  The default is 360K.  When you first load FastFax into
      memory, the amount of RAM you specify must be available.  This does
      not mean that when you activate FastFax that this memory has to be
      available, only during the FastFax load.

/N  - Turn off FastFax activation/deactivation sounds.

/REC - Load the Fax Receiving TSR.