@TTMAIND
  You have four options at this time:
     
    1) Sense Tape Device
     
       This function performs a scan looking for any attached tape devices.
     
    2) Run Test
     
       This function performs a quick destructive test to ensure that the 
       tape device is properly connected to the controller and working.

       You MUST select the "Sense Tape Device" option before attempting to 
       use this option.
     
    3) F2=Rewind
     
       This function will rewind the tape in the device that is currently 
       selected.

       You MUST select the "Sense Tape Device" option before
       attempting to rewind the tape.
     
    4) F3=Retension
     
       This function will retension the tape in the device that is currently
       selected.

       Retensioning a DAT tape is not normally necessary, however, it is 
       recommended that a quarter inch (QIC) tape be retensioned periodicaly
       and especially if the tape has not been used for an extended period of
       time.

       This process may take a while, and you can not break out of it once
       the process has been started.

       You MUST select the "Sense Tape Device" option before attempting to
       retension the tape.


@TTMAIN1
  You have four options at this time:
     
    1) Sense Tape Device
     
       This function performs a scan looking for any attached tape devices.
     
    2) Run Test
     
       This function performs a quick destructive test to ensure that the 
       tape device is properly connected to the controller and working.

       You MUST select the "Sense Tape Device" option before attempting to 
       use this option.
     
    3) F2=Rewind
     
       This function will rewind the tape in the device that is currently 
       selected.

       You MUST select the "Sense Tape Device" option before
       attempting to rewind the tape.
     
    4) F3=Retension
     
       This function will retension the tape in the device that is currently
       selected.

       Retensioning a DAT tape is not normally necessary, however, it is 
       recommended that a quarter inch (QIC) tape be retensioned periodically
       and especially if the tape has not been used for an extended period of
       time.

       This process may take a while, and you can not break out of it once
       the process has been started.

       You MUST select the "Sense Tape Device" option before attempting to
       retension the tape.


@TTMAIN2
  You have four options at this time:
     
    1) Sense Tape Device
     
       This function performs a scan looking for any attached tape devices.
     
    2) Run Test
     
       This function performs a quick destructive test to ensure that the 
       tape device is properly connected to the controller and working.

       You MUST select the "Sense Tape Device" option before attempting to 
       use this option.
     
    3) F2=Rewind
     
       This function will rewind the tape in the device that is currently 
       selected.

       You MUST select the "Sense Tape Device" option before
       attempting to rewind the tape.
     
    4) F3=Retension
     
       This function will retension the tape in the device that is currently
       selected.

       Retensioning a DAT tape is not normally necessary, however, it is 
       recommended that a quarter inch (QIC) tape be retensioned periodicaly
       and especially if the tape has not been used for an extended period of
       time.

       This process may take a while, and you can not break out of it once
       the process has been started.

       You MUST select the "Sense Tape Device" option before attempting to
       retension the tape.


@TTTEST1
                                RUN TEST
     
     
        This test writes to tape a specified number of data blocks then
        rewinds the tape and reads the data blocks back in to validate what
        was written.
     
        The # of Blocks that the test writes is set according to the tape
        device.  This number can be altered by changing the default value.
     
        WARNING - THIS TEST WILL OVERWRITE ANY DATA THAT YOU MAY HAVE ON    
                  THE TAPE!
     
        Press F10 once you exit this screen to start the test.  Then just   
        follow the instructions given on the screen.


@TTOWRITE1

                                Overwrite Prompt

        Running this test WILL DESTROY any data on the tape in the drive.
        
        To start the test, type "run test" and press enter.

        To quit, press ESC.


@TTOWRITE2

                            There is Data on This Tape!

        The tape in the drive is NOT blank!  This is your last chance to quit!

        Data WILL be DESTROYED!

        Press F10 to continue.

        Press ESC to abort.